List Price: $149.99
Sale Price: $77.99
Today's Bonus: 48% Off
I too was having a ton of problems with the lower thread looping under the fabric. It was very frustrating. Finally I figured out how to fix it. Refer to the owner's manual section on inserting the bobbin for photos. What you want to do is drop in the bobbin, and pull the thread through the little slit like it says. But, you have to make sure that the thread goes into the slot in the "tension-adjusting spring" (this is hard to see; pull up the plastic tongue that forms the slit a little with your fingernail to see where it is), although it should go in by itself, then YOU HAVE TO HOLD THE BOBBIN SO IT DOESN'T MOVE AND PULL THE THREAD GENTLY TO SEAT IT INTO THE SPRING. That is the key. After I made sure the thread was all the way in, like magic my lower thread was working perfectly.
Aside from that I am happy with the machine. I especially like the needle threader and think that the top thread is very easy to thread. Now that I figured out the lower thread issue, I want to experiment with all the stitches! I wish the presser foot lever was on the back instead of the inside, but oh well. Be careful taking off the tape because I ripped some off and it pulled up a little plastic on the green part of the machine.
The owner's manual IS hard to read. The Spanish is right after the English, and sometimes they repeat the same instructions twice, and it's not laid out well. It is manageable, though.
They make you think you have to buy special bobbins, but on the box it says you can replace them with class 15, although I have not tried that yet. The accessories seem quite acceptable, except I wish they had given you some ball point needles for knits and stretch rather than just more sharp points.
Overall, it sews fine once you get everything threaded right, and I've made several tops already. Definitely good for a beginner or someone who doesn't want to do anything too fancy.
0 comments:
Post a Comment