I am making curtains and needed a hem foot. I ordered this and it came quickly much to my dismay (means I have to finish my project!) It works great Curtains hemmed!
Showing posts with label home janome sewing machine. Show all posts
Showing posts with label home janome sewing machine. Show all posts
3-IN-ONE Multi-Purpose Oil with Telescoping Spout, 4 oz.
I had one of these. The oil is fine, but after a few months, the bottle leaked and the oil ended up everywhere. I never damaged the bottle so it must be made with the wrong plastic or something.
Going back to a metal can.
Going back to a metal can.
Preciosa Chaton Medley Mix Tanzanite 2.5mm to 4.75mm Pointed
These work great for the jewelry clay I use to make pendant and customized cabochons. Great quality and lots of sparkle. I liked these so well, I purchased more.
Vintaj 2-Piece Magnolia Leaf Bead Cap Embellishment, 18 by 14mm
So many interesting and beautiful pieces of jewelry can be made by using various components of the Vintaj product line. They carry a variety of beautiful metal charms, findings, filigree, chains, and more. The copper, pewter, and black art deco pieces are all pretty, but my favorite is their original natural brass pieces. It has a vintage look to it with its rich caramel brown color.
This Magnolia Leaf Bead Cap is nearly 3/4" long and works as either a bead cap or you can even totally flatten it by spreading the four "leaves" out. As a bead cap, it's pretty used for capping an appropriate-sized oblong glass bead. It's also nice as earrings by dangling several very delicate short lengths of brass chains from the middle...each with small beads or crystals on the ends.
The color can be enhanced by using metal patina and then buffing the raised (relief) areas with the metal relief block for added luster.
For anyone unfamiliar with the Vintaj product line, it's worth a visit to their website to gain some inspiration from their gorgeous photos of finished jewelry...each using many various pieces of the Vintaj line. On the Vintaj website, you'll find a wide array of jewelry components in this natural brass as well as their copper, pewter, and black art deco lines. By clicking on each jewelry component (such as this Magnolia Leaf Bead Cap), you'll find one or two ideas for creative pieces using that particular component. Amazon doesn't allow other websites to be posted, but it's easy to find by googling "Vintaj." There are also a number of YouTube videos on different techniques.
This Magnolia Leaf Bead Cap is nearly 3/4" long and works as either a bead cap or you can even totally flatten it by spreading the four "leaves" out. As a bead cap, it's pretty used for capping an appropriate-sized oblong glass bead. It's also nice as earrings by dangling several very delicate short lengths of brass chains from the middle...each with small beads or crystals on the ends.
The color can be enhanced by using metal patina and then buffing the raised (relief) areas with the metal relief block for added luster.
For anyone unfamiliar with the Vintaj product line, it's worth a visit to their website to gain some inspiration from their gorgeous photos of finished jewelry...each using many various pieces of the Vintaj line. On the Vintaj website, you'll find a wide array of jewelry components in this natural brass as well as their copper, pewter, and black art deco lines. By clicking on each jewelry component (such as this Magnolia Leaf Bead Cap), you'll find one or two ideas for creative pieces using that particular component. Amazon doesn't allow other websites to be posted, but it's easy to find by googling "Vintaj." There are also a number of YouTube videos on different techniques.
Blazer GB2001 Self-Igniting Butane Micro-Torch
List Price: $79.95
Sale Price: $49.44
Today's Bonus: 38% Off
I have been using this torch in my business for fine silver soldering for many years. Tried several others, but this is the best--and now they have improved the adjustment system for better flame control. I just bought 2 new ones to add to the 3 older ones that are still working after YEARS of use.
Distinctive 7-Piece Sewing Foot Home Dec Package - Includes
List Price: $100.00
Sale Price: $49.99
Today's Bonus: 50% Off
Great price for all the feet. And for those having trouble with the ruffler.. every ruffler in the world is a pain in the back side to figure out when you first start using them. And I admit that the instructions that come with it where worthless! I even called the manufacturer and no one got back to me.
I did so much searching online and finally came across a great REAL manual for using a ruffler foot. Google the words "ruffler unruffled" and a free PDF will come up. I used it and after some reading and a few failed tries, fixed my problem.
Just be prepared to take a few days or hours (if your lucky) to figure out the kinks of the enigma called the "ruffler foot".. it is kind of like learning to operate a fancy overhead projector with no instructions.
Again, google "ruffler unruffled"
FAMOWOOD® GLAZE COAT CLEAR EPOXY GALLON KIT
List Price: $109.67
Sale Price: $60.93
Today's Bonus: 44% Off
I make a lot of clocks and other wood projects including coffins, coffee and end tables, signs etc. I've used this product on well over 100 projects. I am extremely happy with it. BUT, to make it turn out right you need to follow the directions exactly. You should start out with a couple of small projects and plan on a little waste. It is designed to be poured on and let the excess drip off. After smoothing it out and removing the bubbles (I recommend a product called "Eat a Bubble". It works great) cover your project completely to prevent dust from getting on it. Let it sit for about 12 hours without removing the dust cover. Then sand off the drips that have dried. Be sure to wear rubber gloves and old clothes because it can get messy until you get the hang of it. Your success will depend on how well you mix it. FOLLOW THE DIRECTIONS!!!
Comfort Grip Crochet Hook 10/Pkg
I have these in dark green and while I wasn't aware when I bought them that there are different sizes included I did notice that the packaging indicated they would fit hooks of all sizes up to size K. As instructed, I cut the tip off the first one I took out of the package and put it on an F or G hook and found it slipped back off too easily. Looking more carefully through the grips I found a few smaller than the first one I've tried and started again with the smallest grip size. It does ok on the G, but using one of an identical size (smallest) on a C hook the grip slides around a bit. It doesn't slip all at once, just gradually travels a bit one way or the other. I wouldn't want one to get stuck so that it couldn't move because I hold the hook in the place where the letter is indicated for size, and that's what the grip is covering.
Truly, I'd rather it stay in place until I want to remove it and then remove easily. At one point I had a grip on a hook and it stayed on very well, not moving at all, but when I wanted to remove it doing so was very difficult. I'd also prefer that they be a good bit thicker and more cushioned. Smaller hooks are smaller diameter all over and it seems to put more stress on my hand to use a smaller hook. I saw a tutorial online that showed how to make a cushy grip for a crochet hook using 1/4" plastic tubing and a pencil gel grip. I'm going to hunt up some tubing next and try that instead of continuing to fight with this.
The foam is a nice surface, but it would be better product with a thicker diameter and also with even smaller grips sizes included. I'd be more forgiving about the size and slipping issue if I were trying to get away with putting them on steel hooks, which are in a different category of small. Anything with a letter for the US size is in the standard range and should work according to the package labeling (size K or less). It doesn't appear to be wearing or deteriorating any from use, but I have not used them for very long yet.
Truly, I'd rather it stay in place until I want to remove it and then remove easily. At one point I had a grip on a hook and it stayed on very well, not moving at all, but when I wanted to remove it doing so was very difficult. I'd also prefer that they be a good bit thicker and more cushioned. Smaller hooks are smaller diameter all over and it seems to put more stress on my hand to use a smaller hook. I saw a tutorial online that showed how to make a cushy grip for a crochet hook using 1/4" plastic tubing and a pencil gel grip. I'm going to hunt up some tubing next and try that instead of continuing to fight with this.
The foam is a nice surface, but it would be better product with a thicker diameter and also with even smaller grips sizes included. I'd be more forgiving about the size and slipping issue if I were trying to get away with putting them on steel hooks, which are in a different category of small. Anything with a letter for the US size is in the standard range and should work according to the package labeling (size K or less). It doesn't appear to be wearing or deteriorating any from use, but I have not used them for very long yet.
Master Airbrush® Brand Cake Decorating System with FREE
List Price: $129.99
Sale Price: $59.96
Today's Bonus: 54% Off
Just starting out airbrushing and the results I have seen so far are fantastic. I have done 3 cakes and used multiple colors. It took a bit to get used to, but once you figure out how to control the flow of the color, it works very well. The colors produced are much bolder and more vivid that possible by coloring the icing. I will buy another from this company when I wear this one out.
Sculpey Original Clay (8 Pounds)
List Price: $50.99
Sale Price: $35.64
Today's Bonus: 30% Off
I've been using sculpey for years. I bought this box about 8 years ago and I still have a little left. It works well for me because I like to paint and seal my finished pieces. The color of the clay doesn't matter to me because it gets dirty while I work, which is why I don't buy individual colors. Once you have it home, I recommend taking it out of the cardboard and putting the clay in a tin box or Rubbermaid container so that the oil isn't absorbed by the cardboard causing the clay to harden and crack. It will save you some clay softener in the long-run.
If you like to paint, acrylic works best and dries fast on the clay. It also turns out well when you want to make a faux porcelain piece. And if you can't form the clay the way you want before you bake it, it can be lightly sanded or shaved to get the shape, contour, or texture you desire. I have also baked and then re-baked to add pieces on to a "finished" form.
I've gotten about 5 6"-8" sculptures out of this box and could probably get 2 more out of what I have left. I've also made about 10 2"-4" pieces as well. This box is well worth it if you like to sculpt and don't have the time to do it everyday or even more than 2 times a week. It lasts forever and even though it's relatively fragile once finished it's still all the more delicate and appreciated.
Me & My Big Ideas Rhinestone Word and Icon Stickers, Mini Fleur
I bought this to put it on my checkbook. It really looks terrific and I have gotten so many compliments on it. The drawback is that the rhinestones will fall off, so I put a clear top coat over the stones to help keep them in place. So far so good.
DARICE WEDDING RING SILVER BIG VALUE 144PC 1638-85
I bought these for my wedding programs. I made the programs myself, I rolled them up and put this around them. Worked perfectly! The kids love them, too!
